Arduino GIGA R1 WiFi
Arduino Giga R1 is a microcontroller board designed for ambitious makers who want to take their game to the next level. This card offers powerful features on a budget, allowing anyone with big ideas to step into the world of technology. It also stands out by having the same form factor as our popular Mega and Due cards.
Equipped with the STM32H747XI dual-core Cortex®-M7+M4 32-bit low-power Arm® MCU, the Giga R1 allows two brains to communicate with each other. Thanks to this microcontroller, you can run micropython on the one hand and use Arduino on the other.
Murata 1DX offers wireless communication with dual WiFi 802.11b/g/n 65 Mbps and Bluetooth® module. You can quickly connect to Arduino IoT Cloud and monitor your project remotely. It also uses the ATECC608A-MAHDA-T secure element for the security of communication.
The Giga R1 has a wide range of connectivity and communication features. It has 4 UART (hardware serial ports), 3 I2C ports, 2 SPI ports and 1 FDCAN port. In addition, there are 76 digital I/O pins, 12 analog input pins and 12 PWM pins.
The board has USB-C and USB-A ports on it. The USB-C port can be used as programming and HID (Human Interface Device), while the USB-A port supports external devices. In addition, camera, display and audio ports are also provided.
The Arduino Giga R1 has an operating voltage of 3.3V and its input voltage (VIN) is in the range of 6-24V. It can draw a maximum of 8mA DC current for each I/O pin. The microcontroller runs at 480 MHz with the Cortex® M7 core and at 240 MHz with the Cortex® M4 core.
In terms of memory capacity, the STM32H747XI model has 2MB Flash memory and 1MB RAM. The dimensions of the card are 101x53mm.
Arduino Giga R1 is a compact microcontroller board with advanced features and is an ideal option for those who want to realize large projects.
